DEK 2-Way Feed Chipper/Shredder Owner's Manual download pdf (Page 9)

Rev: 07/2009 Brush Master™ Chipper/Shredder with 2-Way Feed

Heavy Duty Power Equipment

Assembly

Required tools: A Philips head screw driver

Approximate assembly time: 10 minutes

1. Remove the chipper from its carton.

Remove staples, break glue on top flaps, or cut tape at

carton end and peel along top flap to open carton.

2. Verify all parts are in the chipper

carton.

 Chipper Funnel

 Chipper engine

and box

assembly

(pre-assembled)

 Chipper Chute

 Hardware Bag

 Trailer hitch and

funnel handles

packaged

together

3. Disconnect the spark plug wire.

Before setting up your chipper/shredder, disconnect the

spark plug wire from the spark plug and ground against

the engine to prevent inadvertent starting. This step

should be taken as a precaution whenever you are

working on this machine.

4. Attach the chipper funnel.

First, attach the two handles to the sides of the funnel

using the wrench provided and a Phillips head screw

driver. Tighten the nuts securely.

Second, place the funnel over the opening on the

chipper box, ensuring the rubber gasket is correctly

aligned. Secure the funnel with the two “swing up bolts”

and the one fixed bolt using the wrench provided. Tighten

the nuts securely.

5. Attach the side chipper chute.

Place the chipper chute over the four bolts protruding

from the side of the chipper box and secure the nuts

tightly using the wrench provided.

6. Attach the chip collection bag.

Place the metal grommets of the bag over the wire loops

located at the base of the engine. Wrap the bag under

the bottom of the discharge chute and pull the draw string

tightly and secure it.

7. Attach the trailer hitch.

Place the trailer hitch into the socket at the base of the

chipper over the axle assembly. Insert the pin and secure

with the locking cotter pin.

8. Re-connect the spark plug wire.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

DEK 2-Way Feed Chipper/Shredder Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for Garden shredders DEK 2-Way Feed Chipper/Shredder